Farmall & IHC Tractors Discussion Board |
Re: Frist try at pictures on here.
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by JT on January 13, 2006 at 06:38:43 from (70.226.205.124):
In Reply to: Re: Frist try at pictures on here. posted by SGT K on January 13, 2006 at 06:28:07:
Thanks, it still has a long way to go, but it is getting there. You like them racing tires on the back of it? But seriously, when I bought that tractor, they guy had dismantled every little part on the tractor except transmission, torque tube, and rear wheels, other than that, it was in as many peices as a tractor can be. He said when he bought it, it smoked, rings were shot, baadd, so he took it apart to see how it was built??? So, this old boy has had a lesson on jigsaw puzzles with this tractor. Did not find out until yesterday that the tranny had gears with inadequate teeth on them, so now I get to do tranny work/replace tranny. But Old has that problem solved if I can get the tranny from point A to point B. Jim Jim
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|