Re: Tuff front pully on SA, wont budge

Posted by El Toro on January 09, 2006 at 18:52:07 from (152.163.101.13):

In Reply to: Tuff front pully on SA, wont budge posted by scott#2 on January 09, 2006 at 16:45:02:

Hi Scott, I think you need a puller like this that was designed for the Cub. The center cut may needsto a little wider. Here's the web site for the puller using a hydraulic jack or a ram. Hal
PS: If you have a torch & drill press you can make it yourself. Be sure to use that split bearing separator behind the pulley.

http://www.ytmag.com/farmall/messages/459316.html

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]