Re: 200 motor in a c

Posted by deene on January 04, 2006 at 13:54:16 from (205.188.117.73):

In Reply to: Re: 200 motor in a c posted by El Toro on January 04, 2006 at 03:52:58:

the c block has been overhauled at one time and the pistons are domed aluminum with quite a bit of wear and lots of pitting in the sleeves...previous owner left it sit out with no spark plugs or cover over manifold and between water and dirt dobbers it is pretty much gone..also showing copper on the upper rod bearings which have int logo and date of 67 on them..this is a demonstrator tractor so we hate to change blocks but we purchased a 200 with a good running motor and the rearend broke from falling off a trailer in transit..definately cheaper fix to change out engines than spring for a total rebuild..thanks for the help

Replies:

• Re: 200 motor in a c El Toro 14:13:26 01/04/06 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]