Re: question on MW hand clutch

Posted by DWV on January 03, 2006 at 05:27:05 from (64.12.117.13):

In Reply to: question on MW hand clutch posted by Nebraska Kirk on January 02, 2006 at 18:52:06:

A hole was drilled in the brake pedal (inside pedal on right side of tractor) and a special anchor pin was installed for that end of spring.
For other end of spring a short metal strap with 2 holes bolted to brake cover bolt.These parts can be made pretty easy if missing.Also the originial spring mounting arm is suposed to be cut off for clutch housing clearance.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]