Re: Farmall 140 wheel slippage

Posted by Gene-AL on December 29, 2005 at 09:47:35 from (208.61.155.141):

In Reply to: Farmall 140 wheel slippage posted by Cajungreek on December 29, 2005 at 08:50:47:

Just a guess, but could your rear wheels be mounted on the wrong sides? I've read that the 140 is the same as the Super-A on which the right rear wheel is a heavy cast-iron disc type, while the left rear is a lighter pressed steel disc. This wheel setup is to help balance the weight of the engine & power train which are offset to the left side. Owners of these tractors should know that it's risky to traverse a slope with the engine on the downhill side due to possible rollover! In any case, as the tractor vet said, auxilary wheel weights will help to nail it to the ground and stop that slippage.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]