Re: Farmall C Head Gasket

Posted by Randy in NE on December 28, 2005 at 09:53:08 from (204.124.192.91):

In Reply to: Farmall C Head Gasket posted by Robert Lorencz on December 28, 2005 at 07:12:22:

You will need a head gasket for a 123 cid motor due to the increased diameter of the 3 1/8 pistons. The problem that I ran into was the only headgaskets made for a 123 cid assumed that you have a water pump so all of the water ports are much smaller than those for the 113 cid. The ports are all in the same location, just smaller. The trick to enlarging the holes is to do it neatly without tearing up the head gasket. Check the archives as this was discussed a couple of weeks ago.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]