Re: BN snowplow

Posted by Bill Geer on December 18, 2005 at 08:15:07 from (216.157.203.35):

In Reply to: BN snowplow posted by BobOHIO on December 18, 2005 at 07:04:02:

I had a plow on my bn. To mount the plow I took of the front draw bar. Used the holes to mount a piece of 6" chanle iron. Put the push arms on the chanle iron.
1. As for lifting. I used a 12 volt ele/hyd unit. Got that unit off a old tommy lift gate.
2.I have seen a lot of power steering pumps used.
3. There are manual lift for the bn. That did not stay on very long.Lifted prety hard.
BILL
ps you guys can call if you like 989-292-0644

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]