Re: IH 424 overhaul

Posted by Janicholson on December 08, 2005 at 13:05:57 from (199.17.6.175):

In Reply to: IH 424 overhaul posted by bbwhite1 on December 08, 2005 at 08:28:49:

The process is as follows (details from text books and service manuals left out intentionally)
Get text books on engine overhauls (old)
Get service manual for specific tractor
Use a digital camera to photo everything before during and after taking apart
Place all parts in boxes marked with systems it came from. Protect all sheet metal with blankets.
Make many lists of things needed at the store like new antifreeze hoses and stuff.
Use white cloth tape and a ball point pen to mark all lines and wires
Remove sheet metal as directed
remove intake system At manifold/head(as intact as possible)
Drain oil/h2o
Remove valve cover and oil pan
Remove attachments and sensors on head
Remove head
Remove Pistons
Rework or replace as needed on measurement.
Assemble in reverse order, going from photos and notes.
Have fun do not go nuts or stomp around.
Ask us more questions.
JimN

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]