Re: Any one ever installed a heater ??

Posted by Dave in CT on December 08, 2005 at 08:35:17 from (69.177.242.117):

In Reply to: Any one ever installed a heater ?? posted by Ksfarmmer on December 08, 2005 at 08:02:05:

The fastest would be a magnetic block heater. Just stick it on the engine and plug it in. You could install a coolant tank heater but that involves plumbing the tank into the cooling system - not too bad a job. On my H it goes: hose from a nipple screwed into the carb side coolant drain port to inlet port of tank heater (mounted behind the carb on a bracket sticking up from the frame rail), then run a hose from the outlet port of tank heater around the back of the engine into a T nippled into the temp sending unit port - the sending unit goes into the other side of the T. This is the rig I'm familiar with and I've had nothing but summer starts since I started using it. Search the archives and you'll find posts with some other solutions.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]