Re: 450 to 560 wheel exchange

Posted by CNKS on December 07, 2005 at 17:43:52 from (204.249.178.138):

In Reply to: Re: 450 to 560 wheel exchange posted by Hugh MacKay on December 07, 2005 at 13:37:09:

SM wheel might fit a 560, but the keyway in a H/SH wheel is narrower than on a 460, at least it is on mine. Hard to imagine breaking a key on the H. I drove that thing fully loaded in 2nd for many hours -- not abused, just loaded. I suppose pulling dead weight like you did something had to give. What did give one time on our H was the transmission or differential (don't remember which), when pulling a land plane -- for leveling for irrigation. I have never driven one with any load with the wheels dished in. I do have an M with dished in wheels. I don't like them that way, but it has those monstrous cast weights on the inside and outside (not the factory ones). they must weigh 500+ lbs apiece. I have no safe way to remove them.

Replies:

• Re: 450 to 560 wheel exchange Hugh MacKay 14:30:55 12/08/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]