Re: no steering on cold startup

Posted by binderpower856 on December 02, 2005 at 21:45:33 from (67.142.130.17):

In Reply to: no steering on cold startup posted by skip on December 02, 2005 at 17:58:17:

Spend the money and go ahead and rebuild the MCV assembly, All new gaskets, o-rings, springs, and seals. Then go ahead and put a new pump in it too. Nine times out of ten it is a bad MCV relief has trashed the internal tolerances of the pump, so both should be replaced/rebuilt at the same time. Also, don't try to "get by" with a rebuilt pump from a company such as A&I, you will take a deep screwing. (Been there, done that) Get the rebuilt unit through Case IH.... Your sanity will thank you later...

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]