May be worn out

Posted by John London, Tx on December 02, 2005 at 16:10:45 from (65.127.72.200):

Finally got sleeves out of 43H. I gave up getting it out by myself and had to resort to a machine shop and part with a $100 to find out the #1 cylinder has a crack about 4" long in the middle of the cylinder and the sleeve had substantial rust holding it. The machinist says he can bore it out, install oversize sleeves with sealer and it "might" work. I'm leaning toward using the rebuilt head, and new pistons and sleeves on another machine and use this one for parts until a good block shows up. Any thoughts on overbore and sealant as a reliable fix?

Replies:

• Re: May be worn out the tractor vet 19:28:41 12/02/05 (0)
• Re: May be worn out Janicholson 16:38:13 12/02/05 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]