Re: 41 H HAS NO POWER

Posted by old on November 28, 2005 at 08:28:09 from (207.69.138.139):

In Reply to: 41 H HAS NO POWER posted by JON ARCHAMBAULT on November 28, 2005 at 08:03:17:

Well that could be a number of things. Did you retorque the head after you had woarmed it up?? Are all the valves adjusted right, when you pull a head you need to readjust the valves. Are all the push rods for the valves where they should be, seen them fall out of place and then you will have no power. Do you maybe have a vacuum leak in the intake, or did you maybe get the carb on wrong and the govner isn't opening the carb up when it needs more gas, seen that also. Just a few of a long list that could be your problem. Also did it run right and have power before you changed the head gasket? Also is you fireing order correct that will also kill your power.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]