Re: HELP! M won't start after installing voltage r

Posted by John T on November 28, 2005 at 06:01:11 from (66.244.90.98):

In Reply to: HELP! M won't start after installing voltage reg. posted by Granger on November 27, 2005 at 11:11:24:

Granger, I dont know from sitting here if shes not starting cuz of a drained battery or a starter or starter switch or wiring/connection problem. HOWEVER that dying n failure to re crank makes me wonder how good n how much charged the battery actualy is and makes me suspect a short somewhere thats discharging the battery.............. Soooooooooo insure the battery is good n capable of accepting a charge (maybe have a shop load test it) and if so give the battery a good charge, then see if she will crank and we will go from theres maybe looking for a short thats discharging the battery.

Have the lights on when you try n crank her n see if they dim down badly when you try n crank her????? If so I suspect a stareter problem. If they like dont change much when trying to crank, then I suspect a bad connection or a bad starter switch. If in doubt in the meantime I would remove, clean n wire brush n reattach each n every battery n starter switch n starter n ground cable conneciton then try her after a good battery charge ????????????

Kinda acts like the batery is simply dead if she died n wont re crank and a short may have caused that even if the genny and new VR are both fine.

Lemme know

John T

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]