Re: 434 starting problem update

Posted by Janicholson on November 19, 2005 at 14:52:31 from (66.173.50.152):

In Reply to: Re: 434 starting problem update posted by AL Sproule on November 19, 2005 at 12:07:53:

Experiment.
Check the end of the black wire with a volt meter (or test lamp) if it has voltage when the key is turned to the start position, that wire (and only that wire) should be going to the "S" terminal. No wires ever go from the regulator to the "S" term.
They will go from the Bat terminal of the Regulator to the Battery cable side of the solenoid with a bigger terminal end to fit the stud.
A manual may be the functional difference.
Good Luck, JimN

Follow Ups:

• Re: 434 starting problem update AL Sproule 18:27:46 11/19/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]