Re: [email protected]

Posted by Dave Grindle on November 16, 2005 at 09:05:53 from (207.190.64.175):

In Reply to: [email protected] posted by Anton C Holstrom on November 16, 2005 at 05:43:45:

Anton -- all good advice so far.....one other thing to check , IF the fuel starvation problem started AFTER you put the new float in - then it's most likely the float (adjustment) itself....bend the float up just a tad so it will drop enough to let the needle valve open up - if you bend it up too much your carb will leak ....i've also had the problem of the float getting bent a little side to side so that it rubs on the carb & won't go either up or down

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]