Re: Farmall A head

Posted by Janicholson on November 14, 2005 at 12:20:44 from (199.17.6.175):

In Reply to: Farmall A head posted by randy on November 14, 2005 at 11:55:22:

Use a 5"xheadlength X 1/4" plate of steel
Drill holes to match rocker tower bolt holes (put tower on plate mark, drill)
Set on top of studs (with head nuts screwed back onto head studs flush with top of stud) and use longer bolts in rocker tower holes (thread in at least 3 bolt diameters) till they are evenly tight on plate.

Use head nuts to jack the head up in the air evenly one flat at a time.

If everything is disconnected, this breaks the seal and not the casting.
JimN

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]