Farmall & IHC Tractors Discussion Board |
Re: This question is electrical !
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Randy-IA on November 13, 2005 at 07:41:05 from (209.152.95.41):
In Reply to: Re: This question is electrical ! posted by John T on November 12, 2005 at 21:42:37:
Hi John , Thanks for answering ! I looked at the alternator and this is the way it's wired . The two original cloth wires are on the big lug and then from there a jumper goes to the diode plug ( orange ) a white wire from the diode plug goes to nothing . That's it . I guess it's set up as a one wire system . Is the white wire supposed to go to something ? It's been quite a while since I've had a alternator problem . Not even sure yet that this IS a problem . I don't get to work much on my stuff in the cold of winter ( more so the dark of winter ) during the week since I don't have any place inside to work on my vehicles close by . If I can get them to my place of employment ( 8 miles ) I can work on them there . So what I'm getting at is that it sometimes takes a long time for me to work on and fix a simple problem one day a weekend at a time . So bare with me please ? Take care ...Randy
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|