Re: IH 686 Tractor- 70's

Posted by JB2 on November 09, 2005 at 18:18:56 from (72.56.121.128):

In Reply to: Re: IH 686 Tractor- 70's posted by 7D Ranch on November 09, 2005 at 17:59:22:

Hi 7D, the picture shows it as a single part but the picture is small and can not tell if it is spring and ball but testing procedure says if it is less than 1800 psi then replace the relief valve, so from that statement it would indicate there is no adjustment.

On my Dad's IH 1500, 1550, and 2250 loaders when the relief spring got weak, we would just add a dime (10 cent piece) or two under the nut that held the spring against the relief ball.

JB2

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]