Re: M block

Posted by the tractor vet on November 04, 2005 at 05:47:13 from (4.124.75.242):

In Reply to: M block posted by mrick on November 03, 2005 at 20:33:56:

Sometimes you will find this and the proper way to fix this problem is to bore that hole out oversized and install arepair sleeve and then bore it to take the new one , we have found this problem on a lot of the old MD thru 450 D and yea ya can smear something on it for a bandaid but there is a good chance that it will get worse and then crack the sleeve then ya can either junk it or do it wright the next time. Myself i would prefer to do it one time .

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]