H Running Rough

Posted by Farmall Ed on October 29, 2005 at 16:24:41 from (65.135.143.221):

My H was running just fine when I put it up a few days ago. Started it today and wasn't sure iT was going to make it out of the shed. It was sputtering and acting like the carb was out of adjustment. I could get it running fairly well by adjusting the main adjustment screw. Then I noticed it was very sensitive to the choke positions, never like this before, so I took the air connection off at the carb and found out the screw that holds the choke plate has sheared,allowing it to move freely. I have two questions after all this rambling. First where do you suppose the head of that screw is? Second does the carb kit include that screw? Thanks Ed

Follow Ups:

• Re: H Running Rough nofirefarmall 19:43:20 10/29/05 (0)
• Re: H Running Rough MagMan 16:49:40 10/29/05 (2)
  • Re: H Running Rough Farmall Ed 20:15:45 10/29/05 (1)
    • Re: H Running Rough MagMan 02:09:35 10/30/05 (0)
• Re: H Running Rough old 16:45:25 10/29/05 (0)
• Re: H Running Rough MagMan 16:42:15 10/29/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]