Re: 3 pt LIFT ARMS WON'T STAY UP

Posted by Aces on October 25, 2005 at 16:43:26 from (65.54.155.48):

In Reply to: 3 pt LIFT ARMS WON'T STAY UP posted by lenray on October 25, 2005 at 12:58:10:

Lenray the friction disk would have nothing to do with your float down, because you said have to hold lever up, if you hold the lever up it should not go down. So you have bad link inside or bad valve, or bad seal some place. Could be out of adjustment. You also said it will not hold load with engine of, I would but load on the lift arms and remove the third link plate with engine off and see if you see oil leaking inside, let engine off for some time to let the oil frain off that should be there. Let us know what you find.

Follow Ups:

• Re: 3 pt LIFT ARMS WON'T STAY UP Allan in NE 17:02:44 10/25/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]