Re: Super C Pre Cleaner Again!!!

Posted by farmallhal on October 25, 2005 at 15:19:48 from (64.24.35.16):

In Reply to: Re: Super C Pre Cleaner Again!!! posted by Dave_Id on October 25, 2005 at 14:56:52:

Dave, I'm sure they are as I was there last spring. They were still near Kent at 212th off of 167 I believe. Seems like days of operation is different now like late week and Saturday only. You should be able to find them on the Boeing website as I recall they used to be there.
A couple other good salvage yards were Pacific Iron and Metal on 6th Ave. South, and Puget Sound Salvage, on 4th Ave. South. Also, Alaskan Brass and Copper was a good place if you needed new material like Stainless Steel, etc. or short pieces from their cut-off bins. I think there was another place called Metal Shorts in the same general area of south Seattle.
Good luck and send me an e-mail if you can't locate a phone no. as I still have lots of contacts at Boeing. Hal

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]