Re: Another M question on width

Posted by 26Red on October 25, 2005 at 11:55:08 from (170.92.100.2):

In Reply to: Another M question on width posted by Randy-IA on October 25, 2005 at 05:03:52:

You will need a large 3/4" drive breaker bar with a large socket, I can't remember the size but it is at least 1-1/4"? Don't forget a cheater pipe (3FT LONG) to slip over the breaker bar to make things easy.

Bring a can of penetrating oil, a hydraulic bottle jack and some blocks of wood to get the jack at the right height under the axle housing.

And bring some extra muscle too! It is at least a 2 man job.

I helped a guy spin the tires around on a MD once. It took us a good hour to do it.

good luck...

Follow Ups:

• Re: Another M question on width Randy-IA 17:45:32 10/25/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]