Re: 706 knock in engine after rebuild

Posted by the tractor vet on October 22, 2005 at 10:49:39 from (4.124.70.163):

In Reply to: 706 knock in engine after rebuild posted by fedgar on October 22, 2005 at 08:39:43:

Did you rebuild the rods ???? did you FIT EACH PISTON To THE HOLE????? by mic. the out side of the piston and checken the inside bore with a mic. ???? and did you hone the sleves with a ridge hone after you installed them ???? did you plastia gauge the bearing???? If you did not do all of the above then it could be any place . Did ya have the head rebuilt and did they get the valves set correctly in the seats some valve must stick out of the head and some valves must be resessed and with out running out in the rain and looken at the books in the truck my mind can not remember that is why i have all the books . And somebody will tell me that this is not ROCKET SICENCE but if ya want a engine to run good and last long then it is . I build every engine like a 100000 dollar racing engine and PLUM REFUSE TO DO AND IN CHASSIE

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]