Re: Removing injection pump on a MD

Posted by Geoff NY on October 19, 2005 at 16:20:52 from (24.185.231.211):

In Reply to: Removing injection pump on a MD posted by Brad in WI on October 19, 2005 at 10:35:02:

Brad, as stated by others, remove the front cover and expose the drive gear of the pump. Now, rather than removing the three bolts that hold the timing pointer, remove the nut that holds the shaft. Then remove the bolts that hold the pump (you will have to access them through the holes in the gear). Take a chiesel or putty knife and work the pump away from the front cover. The shaft is keyed so don"t worry about timing, it will only go on one way. The pump gear stays meshed with the rest of the front gears and won"t come out without removing the whole front cover of the motor. It"s almost impossible to get that motor out of time this way.

Follow Ups:

• Re: Removing injection pump on a MD Ron in Nebr 20:12:07 10/19/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]