Re: 826 Hydro steering problem

Posted by Weldon on October 16, 2005 at 18:39:45 from (162.39.117.55):

In Reply to: Re: 826 Hydro steering problem posted by David Riedel on October 16, 2005 at 11:41:01:

David
You sound rather knowledgeable of the steering system components. I am assuming that you are using some type of repair manual to guide you in finding the problem. If you are not , GET ONE!! I&T manual has a "trouble shooting" section for the steering system.
First, I recommend that you do a pressure test EXACTLY as directed by manual, which states ; "Gauge should read approximately 1800-1900 psi. If pressure is not as specified, renew the saftey relief valve located on bottom side of the multiple control valve. Relief valve is available as a unit only."
This test will tell you if safety relief valve is culprit or whether pump is faulty.
Next, do all the operational test as directed by the manual.
Do not get discouraged . I feel that it is something simple that has been overlooked or something that you are unaware of that needs testing.

Good luck and let us know what you find.
Weldon

Follow Ups:

• Re: 826 Hydro steering problem David Riedel 05:35:09 10/17/05 (1)
  • Re: 826 Hydro steering problem Weldon 07:58:01 10/17/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]