Re: 46 farmall h oil pressure

Posted by Slappy on October 14, 2005 at 16:30:27 from (152.163.101.13):

In Reply to: Re: 46 farmall h oil pressure posted by walter on October 14, 2005 at 09:27:08:

Walter here are the clearance values:

diametral clearance of gears in pump body - 0.005-0.008
Body gears endplay - 0.003-0.006
Body gears backlash - 0.003-0.006

These clearances will give "like-new" performance, however, a pump 0.002 or so out of spec will still give better oild pressure than you describe.

Can I assume from your last e-mail that you didn't put the new rod and main bearins in? If not you may want to check the rod and main clearances again.

Follow Ups:

• Re: 46 farmall h oil pressure walter 17:21:54 10/14/05 (3)
  • Re: 46 farmall h oil pressure walter 19:52:51 10/14/05 (2)
    • Re: 46 farmall h oil pressure Slappy 06:34:31 10/15/05 (1)
      • Re: 46 farmall h oil pressure walter 11:16:30 10/15/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]