Two hours later, a blueprinted SA oil pump

Posted by scott#2 on October 08, 2005 at 16:31:54 from (68.163.64.4):

I really didnt want to go there but I just couldn't help myself. The pump is now within spec at all locations, (gear backlash, right at the limit)nice having a machine shop around. Milled the body flange, surface ground the cover plate, measured all tolerances .0035 gear to cover clearance, .005" running clearance (gear to housing side) This should be a real good test. At least if I have low pressure on this SA, I know it wont be the pump. Took me just about as long to find the $$#@$$#@&* cotter pin for the screen. After tearing the place apart, I finally found it stuck to one of the magnetic indicator bases...figures. Thanks for the numbers. Oh by the way, those 2 gaskets are of different thickness.

scott#2

Follow Ups:

• Re: Two hours later, a blueprinted SA oil pump Bob M 20:37:22 10/08/05 (2)
  • Re: Two hours later, a blueprinted SA oil pump Slappy 05:31:31 10/09/05 (1)
    • Re: Two hours later, a blueprinted SA oil pump Bob M 07:23:32 10/09/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]