Farmall & IHC Tractors Discussion Board |
Re: Farmall B weight
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dave H (MI) on October 06, 2005 at 06:47:03 from (152.163.101.13):
In Reply to: Farmall B weight posted by Robert J on October 05, 2005 at 21:09:40:
1780 pounds was the stated weight on the basic Farmall B. You might want to add a little bit to cover any additions like wheel weights, loaded tires, etc. When I hauled mine home three weeks ago I guessed at 2500 pounds. Used a fairly standard two axle trailer with two ramps that I got from the rent-all place with chains and ratchet binders. Trailer did not have electric brakes but had surge brakes which are a help. Pulled the load with an F-150 and really didn't notice it was back there. Not a monster tractor to haul. I had to measure several trailers before I found one that was the required width between the fenders. Highly recommend the chains and binders...only about $10 to rent if you do not own. Not a big deal. First time I hauled my own tractor and had no problems. Have fun and good luck. Nice tractor, how about a pic?
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|