Farmall & IHC Tractors Discussion Board |
Re: 1586 clutch??
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Nat on October 03, 2005 at 04:48:15 from (64.80.110.22):
In Reply to: 1586 clutch?? posted by WesD on October 02, 2005 at 22:10:06:
Check a couple pages back in this forum. There's a thread where another guy was having the same problem with a different tractor. The TA system is the same design, so it's got to be the same problem: It's probably still out of adjustment, regardless of what the dealer tells you. I think it's the linkage to the TA dump valve that's out of adjustment. When you push the clutch, it kinda does the same thing as holding the TA lever in the middle (NOT recommended). The tractor's not in direct drive or TA. When you let the clutch out, it engages the TA. The clutch is already engaged, the tractor's not moving, so it jumps ahead.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|