|
Farmall & IHC Tractors Discussion Board |
Re: OT, wet ear to dry shell corn chart followup
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on October 02, 2005 at 03:42:39 from (216.208.58.115):
In Reply to: Re: OT, wet ear to dry shell corn chart followup posted by Leroy on October 01, 2005 at 15:00:06:
Leroy: Back when I did the ground ear corn in the 1970s, I harvested the first 3 years using a NH 890 forage harvester equiped with recutter screens fine enough to break all kernels. The harvester was also equiped with a 2 row snapper or combine - picker type head. The problems I encountered with this unit were; couldn't feed enough cobs fast enough to utilize horse power. Also found I was loosing a lot of fines from ground material to the wind. I then went to a combine with 4 row head. By using cylinder speeds similar to wheat or barley and setting concave at about 3/8", combine would break cob enough that most all went down through seives with grain. We then used the 890 harvester as a stationary grinder, feeding the material to it with self unloading silage wagons. This made far better use of 1066 hp and cut down on the field losses. Had a cleaner product as well. When it came to selling high moisture ear corn, my customer and I went to the local county Ag people, looking for a fair formula in pricing this product. the formula is actually quite simple . Lbs of actual product X % dry matter divided by .845. .845 being the accepted dry matter content of grain traded on open market. For example a ten ton load, 20,000 lbs, having a moisture content of 25% or 75 % dry matter. gives you 15,000 lbs dry matter divided by .845 equals 17,751.48 lbs of market grain. I mentioned the benefits for both parties in this deal in my previous post. The Ag people advised at the time corn cob meal was equal to corn grain as cattle feed. My customer got a ground product ready for feeding, he also provided the storage and got a harvest time price on corn. I had a market for corn I did not have room to store, did not have to pay any elevator or drying charges. I know some folks that still do this, one example involves several hundred ton. They divide the tonnage into 12 and customer pays by the month, but he also pays each months current market price. In my case it never involved a lot of tonnage, just a case of marketing a surplus. It worked well for a lot of years and we remained friends after the deal.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Torque Wrenches - by Curtis Von Fange. When working with fasteners a torque wrench can play an important role in the correct assembly of critical equipment components. Lets examine in detail some of the reasons for using a torque wrench along with how to correctly use the variety of wrenches available. Applying the proper torque to a fastener accomplishes a number of tasks. First of all correct torque will hold the parts together. This may seem like a trite statement but � think about it for a second. Engineers have designed
... [Read Article]
Latest Ad:
WANTED IH C200 gas engine — complete running motor Wanted complete used IH C200 gas engine in running condition for an International 574 gas tractor. My block has a hole in it and is dead, so a rebuild kit wont do it — need a whole running motor. The C200 also came in the 544 and 674 gas trac
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|