Re: Super H Carb help

Posted by Rootsy on September 30, 2005 at 06:58:31 from (24.176.33.68):

In Reply to: Super H Carb help posted by Gary_N_WV on September 29, 2005 at 15:21:55:

I;ve had a few of these broken off in carbs i've taken apart.. they are a fragile piece... i've had spares to replace them with... i've never tried to buy a new one... if i had to i'd just turn a new one on the lathe if i needed...

it screws out of the carb but NOT easily.. if at all... generally i have to drill thru with a drill the size of the minor thread diameter.. then i use a fine pick and peel the brass out of the threads... very difficult for an eaze-out to get in there and grab the brass to remove it...

Jamie

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]