Re: Farmall A snow plow

Posted by Hugh MacKay on September 27, 2005 at 13:38:40 from (209.226.106.189):

In Reply to: Farmall A snow plow posted by keaggyheg on September 27, 2005 at 09:04:32:

There were snow blades for Super A with hydraulic lift and I expect there were handlift blades for the A. Probably the same blade or close. Problem is, very few of these tractors were sold new with blades, probably less than 5%. That makes a factory blade very scarce.

In my opinion, they weren't much of a blade, not built rugged enough. I had one and I sold it and fabricated my own blade. Guess what, I couldn't convince the welder to build the fabricated one rugged enough either. Folks just underestimate these little tractors. I am now in the process of rebuilding my blade. Not hard to convince this welder what needs to be done. He can see all the metal I bent or busted up.

I will have this done in couple of weeks, can e mail you some photos if you wish.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]