Re: Super C PTO shaft?

Posted by Haas on September 22, 2005 at 06:03:09 from (12.65.67.9):

In Reply to: Super C PTO shaft? posted by leon on September 22, 2005 at 03:57:24:

As John said, no need to pull top of tranny. Take out the bolts and the unit slides out the back. As John says, use a gear puller to get the gear off the shaft inside the unit. Don't try to drive the shaft out, as that won't work because the woodruff key on the shaft at the gear will hit the bearing preventing removal by this method.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]