Re: Head Gasket says: Sealer/Retorque Required ??

Posted by scott#2 on September 18, 2005 at 14:33:54 from (141.156.94.169):

In Reply to: Re: Head Gasket says: Sealer/Retorque Required ?? posted by MagMan on September 18, 2005 at 13:21:52:

Well, heres what I did, Sprayed Permatex Hi tack red, threw some WD on the threads, torqued it down to 65 in about 5 or 6 steps. The book said 45, the updated number said 80, so I comprimised and did 65 thinking that breaking them loose to re torque later might be a little easier. By the way I should have known better that to use WD instead of motor oil on the nuts threads. Trying to tell the click from the nut creaking got quite difficult.

scott#2

Follow Ups:

• Re: Head Gasket says: Sealer/Retorque Required ?? CNKS 18:00:21 09/18/05 (1)
  • Re: Head Gasket says: Sealer/Retorque Required ?? scott#2 16:09:16 09/19/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]