Re: Three Point Hitch for Farmall H

Posted by 26Red on September 14, 2005 at 11:31:00 from (170.92.100.2):

In Reply to: Three Point Hitch for Farmall H posted by Scott Swanson on September 14, 2005 at 11:17:51:

Got a saginaw on my Grandpa's H and my 300. Spendy but worth it. We have cultivators, 6ft disk, brush mower, pallet forks, and a rear blade that we use between the two tractors. The H has a pto drive hyd. pump that supports the loader, I just added another valve to run the 3-pt hitch. I would like to relocate pto pump to run off the belt pulley, then I could run the brush hog behind the tractor. You could easily plumb the belly pump to a remote valve for the 3 point hitch, if you wanted down pressure for the 3 pt, otherwise, a one way cylinder is okay too.

Follow Ups:

• Re: Three Point Hitch for Farmall H ChrisL 08:30:53 09/15/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]