Re: 400 won't fire

Posted by El Toro on August 13, 2005 at 19:51:10 from (152.163.101.13):

In Reply to: Re: 400 won't fire posted by corny on August 13, 2005 at 15:56:24:

You may not be that far off. If you're at TDC on the compression stroke, gently pull the distributor out and move the rotor so it points
to the No1 plug wire and reinstall. Make sure your rotor is at No1 after installing the distr. Should start then. Hal

Follow Ups:

• Re: 400 won't fire Corny 12:01:43 08/14/05 (1)
  • Re: 400 won't fire El Toro 12:13:48 08/14/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]