Re: Transmission cover replacement

Posted by greensboro george on August 09, 2005 at 06:58:22 from (167.102.133.160):

In Reply to: Transmission cover replacement posted by Ed well on August 06, 2005 at 14:43:24:

We just did this to my C the other day. Shifter was put in neutral. One guy slowly lowered the crane, one guy kept the lid level and the third guy (our "smartest" guy) lined up the forks. With a flashlight, he stuck a long thin screwdriver in to slide the gears a little so the forks lined up with the grooves in the gears. Once the lid was down we shifted into each gear. We had to do it over three times to get it right, but it was easy with good help!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]