Re: Allan - Are the duals on yet?

Posted by Dr.EVIL on July 29, 2005 at 13:21:05 from (216.136.115.250):

In Reply to: Re: Allan - Are the duals on yet? posted by Allan in NE on July 29, 2005 at 10:58:23:

ALLAN - Duals, especially clamp-on type on the older non-wedge-lock IHC wheels should be smaller in dia. than the main tractor wheel/tire. The larger IHC's (1256/1456) with clamp-on cast centers broke the hubs all too frequently the way it was. The smaller tractors like Your 686 never had wedge-locks available.
Reason for the smaller duals is to carry less weight on the dual and reduce the off-set force on the center of the cast wheel. Of ALL the factory duals shipped from FARMALL with new tractors less than 1/4 had tires mounted. Used tires would be dualed up with the new tractor.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]