Re: SMTA Mystery Bearing

Posted by the tractor vet on July 24, 2005 at 17:55:14 from (4.124.83.195):

In Reply to: Re: SMTA Mystery Bearing posted by riverbend on July 24, 2005 at 14:49:36:

Anytime you change bearings on a ring and pinion you had best be checking set up as bearing arenot always the same and can change the set up you may not see it but it is there . The balls that he was talken about were from the bull pinions as the axel bearings are larger. If the rear end was the also used as the hdy. resivor then i would be a littel more worried about how clean it was . The best cure is to put a couple flat COW magnets in the rear between the bull gears and after a year or so pull the PTO and clean the magnets

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]