IH 430 balers

Posted by Jon Holt on July 20, 2005 at 20:20:11 from (207.200.116.203):

I was baling with a few weeks back and broke one of the needles on my 430 baler. I got a new needle and put it on, but when I try to adjust it, the needle moves to the inside of the bale chamber and ends up rubbing on the chamber. I have tried to move it all the way out but it keeps moving to the inside. I took the other needle off and tried it on the problem side and it does the same thing. I can't really see any spots where it is bent or anything. I was wondering if anyone has run into this problem and might know how to remedy it. Thanks in advance.

Follow Ups:

• Re: IH 430 balers JB2 20:53:55 07/20/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]