Re: 706 auxiliary hydrauic control

Posted by Nat on July 18, 2005 at 06:17:19 from (64.80.110.47):

In Reply to: 706 auxiliary hydrauic control posted by VOLfarmall on July 17, 2005 at 15:55:15:

You say "1 aux," then you say "2 circuit."

If you have one auxiliary, you have ONE circuit. If you have two auxiliaries, you have TWO circuits. It can't be one of each.

So, which is it?

One auxiliary would mean one long lever to the right of the seat. Is that what you have?

If you already have two long levers there, there isn't enough room under the seat for a third auxiliary. You would need the "power beyond" block that fits on the end of the hydraulic stack under the seat, and a separate spool valve.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]