Re: 350 Rear Axle Seal

Posted by Roger WI on July 12, 2005 at 19:16:58 from (69.58.151.92):

In Reply to: 350 Rear Axle Seal posted by Illinois Boy on July 12, 2005 at 09:22:06:

I assume that a 350 is the same as an H or M to change the seal. All you need to do is jack up the tractor just high enough for the wheel to clear the ground. Park the tractor next to a post on level ground or inside a garage so the wheel can be leaned up against it without tipping over as the wheel and tire are heavy (especially if you have fluid in the tires). Once you have the wheel off the seal is easy to change. Roger

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]