Re: F12 Kickback

Posted by Pete in Holland, MI on July 09, 2005 at 16:07:29 from (24.231.248.86):

In Reply to: F12 Kickback posted by Kevin Hood on July 05, 2005 at 15:36:50:

Kevin -

Pull the wires from all your spark plugs.

Pull the spark plug from #1 cylinder. Slowly crank the engine till the pistion is on its way up in its compression stroke. Insert a 1/8" dowel long enough to reach the piston and extend well outside the hole. Set your mag handle (casting on the end of the mag) all the way up (off) then down about 1/4 or 3/8". Should be full retard. Slowly crank the engine, watching the dowel dowel for its indicator that you've reached TDC. Mag should impluse at the very top of the stroke or slightly past. Impulse tripping before TDC at this setting will create your kick-back.

Good luck !

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]