Re: SUPER C idle too rich

Posted by farmall 230 puller on July 07, 2005 at 18:59:40 from (64.136.26.235):

In Reply to: Re: SUPER C idle too rich posted by JOWENS on July 07, 2005 at 09:07:05:

The play on the shaft should not be a big problem as long as the gears don't jump timing. For setting the timing I always set it by where the tractor runs best. My 230 I hooked my disk behind it pulled them until it got warm then turn the dist. back and forth to see where the tractor could pull the disk best. It is a lot of hopping on and off the tractor but worth the time. One other thing I have found out every farmall I have ever had the slotted plug just in front of the dist. never had any oil in it, and that might be why you have play on the dist shaft. I always fill that housing with SAE90 or STP. I hope this might help.
Matt

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]