Re: I may be stupid... will this fit?

Posted by Big Don on July 02, 2005 at 07:20:21 from (24.114.127.181):

In Reply to: I may be stupid... will this fit? posted by Darren in Pesotum on June 29, 2005 at 10:41:10:

Darren,
The mountings for the I-656 are designed for a tractor that is closer to the ground than an
F-656. I suspect you could bolt the loader right on BUT, it would not go low enough to the ground to work. If you can find a dealer that still has a parts book on these loaders, the differences in the mounts can be seen in the pictures. It is the front mountings and also the main subframe at the rear where the loader attaches to the axle that are different. These require a completely different front bracket and a major rework at the rear.
Don

Follow Ups:

• Re: I may be stupid... will this fit? Hugh MacKay 19:08:52 07/02/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]