Re: How many seals go on to Brake shaft for Farmal

Posted by Wane Swenson on June 30, 2005 at 10:07:05 from (66.228.226.15):

In Reply to: How many seals go on to Brake shaft for Farmall H posted by marvin on June 30, 2005 at 09:18:00:

The lip or spring side of a seal always goes toward the oil supply that you do not want leaking out.
I have always put 2 seals in on my H & M tractors. Be sure ALL of the old seal housing is removed.
Use a flat file to remove any sharp edges from the brake drum, put a small amount of gun grease in between the seals, grease the sealing surface on the drum and install.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]