Re: tap and stud extraction tips, please

Posted by FC on June 22, 2005 at 13:37:41 from (64.141.134.66):

In Reply to: tap and stud extraction tips, please posted by Kevin Brooks on June 22, 2005 at 11:35:08:

I am with Rusty on this one....I had a broken transmission drain plug on my C which nothing would get hold of. Tried everything and was ready to drill it out and hope I did not harm the threads. As a last resort I used a small wire welder I have to weld a bolt into the recess or what was left of it. I then hit it with pb blaster while it was still hot (probably not a good idea), after it cooled for a few minutes a wrench took it right out. It almost felt like I could have backed it out by hand. A stick welder would probably have worked better, but you use what you have.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]