Re: B rocker arm bushing update

Posted by Pharmall on June 18, 2005 at 15:20:58 from (68.9.106.167):

In Reply to: Re: B rocker arm bushing update posted by El Toro on June 18, 2005 at 14:48:08:

Thanks for asking Hal.. It was a '48 "C" actually. Haven't had
much time lately, but I did manage to get the crankshaft pulley
off today. Made up one of those pullers like the one that you
posted. It worked well, but I blew the seal on a 2 ton hydraulic
press before using one that was more appropriately sized. That
first "tingk" was a pretty nice sound! Suprised that there was no
keyway though...

Got the wheels and torque tube off, and getting ready to take off
the axle housings 'cause those seals were leaking really bad.
The archives have me a little concerned about the inner seal, but
we'll burn that bridge later. Off to the local county fair with
sweetie tonight...

Follow Ups:

• Re: B rocker arm bushing update El Toro 15:55:50 06/18/05 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]